Show Cluster Candidates - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

show cluster candidates

show cluster candidates
Use the show cluster candidates privileged EXEC command on the command switch to display a list
of candidate switches.
Syntax Description
detail
mac-address H.H.H.
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
You should only enter this command on a command switch.
If the switch is not a command switch, the command displays an empty line at the prompt.
The SN in the output means switch member number. If E is in the SN column, it means that the switch
is discovered through extended discovery. If E does not appear in the SN column, it means that the switch
member number is the upstream neighbor of the candidate switch. The hop count is the number of
devices the candidate is from the command switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show cluster candidates command:
Switch# show cluster candidates
|---Upstream---|
MAC Address
0030.85f5.8e80 3550-12T
0005.313c.5880 Switch2
0005.dcc8.01c0 2950-145
0002.b922.7180 C2820
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-282
show cluster candidates [detail | mac-address H.H.H.] [ | {begin | exclude | include} expression]
(Optional) Display detailed information for all candidates.
(Optional) Hexadecimal MAC address of the cluster candidate.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Name
Chapter 2
Device Type
PortIf
WS-C3550-12T
Gi0/4
WS-C3550-12T
Gi0/1
WS-C2950T-24
Fa0/1
WS-C2820-24
Fa0/3
Catalyst 2950 and 2955 Cisco IOS Commands
FEC Hops SN PortIf
FEC
1
0
Fa0/1
2
E
Gi0/5
3
E
Gi0/2
Up
0L-10102-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents