Show System Mtu - Cisco Catalyst 2950 Command Reference Manual

show system mtu

show system mtu
Use the show system mtu privileged EXEC command to display the global maximum packet size or
maximum transmission unit (MTU) set for the switch.
Syntax Description | begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show system mtu command:
Switch# show system mtu
System MTU size is 1500 bytes
Related Commands Command
system mtu
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-410
show system mtu [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2
Description
Sets the MTU size for the switch.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01