Show Access-Lists - Cisco Catalyst 2950 Command Reference Manual

show access-lists

show access-lists
Use the show access-lists privileged EXEC command to display access control lists (ACLs) configured
on the switch.
Syntax Description name
number
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show access-lists command:
Switch# show access-lists
Standard IP access list testingacl
Standard IP access list wizard_1-1-1-2
Extended IP access list 103
Extended IP access list CMP-NAT-ACL
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-270
show access-lists [name | number] [ | {begin | exclude | include} expression]
(Optional) Name of the ACL.
(Optional) ACL number. The range is 1 to 2699.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
permit 10.10.10.2
permit 1.1.1.2
permit tcp any any eq www
Dynamic Cluster-HSRP deny
Dynamic Cluster-NAT permit ip any any
permit ip host 10.123.222.192 any
permit ip host 10.228.215.0 any
permit ip host 10.245.137.0 any
permit ip host 10.245.155.128 any
permit ip host 10.221.111.64 any
permit ip host 10.216.25.128 any
permit ip host 10.186.122.64 any
permit ip host 10.169.110.128 any
permit ip host 10.146.106.192 any
Chapter 2
ip any any
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01