Show Vlan - Cisco Catalyst 2950 Command Reference Manual

show vlan

Table 2-31
Field
Trans1
Trans2
AREHops
STEHops
Backup CRF
This is an example of output from the show vlan brief command:
Switch> show vlan brief
VLAN Name
---- -------------------------------- --------- -------------------------------
1
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
This is an example of output from the show vlan id command. The specified VLAN is in the extended
VLAN range.
Switch# show vlan id 2005
VLAN Name
---- -------------------------------- --------- -------------------------------
2005 VLAN 2005
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
2005 enet
This is an example of output from the show vlan summary command:
Switch> show vlan summary
Number of existing VLANs
Number of existing VTP VLANs
Number of existing extended VLANs : 0
Related Commands Command
switchport mode
vlan (global
configuration)
vlan (VLAN
configuration)
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-418
show vlan Command Output Fields (continued)
Description
Translation bridge 1.
Translation bridge 2.
Maximum number of hops for All-Routes Explorer frames—possible values
are 1 through 13; the default is 7.
Maximum number of hops for Spanning-Tree Explorer frames—possible
values are 1 to 13; the default is 7.
Status of whether or not the Token Ring concentrator relay function (TrCRF)
is a backup path for traffic.
default
SAID MTU
102005 1500
Description
Configures the VLAN membership mode of a port.
Enables config-vlan mode where you can configure VLANs 1 to 4094.
Configures VLAN characteristics in the VLAN database. Only available for
normal-range VLANs (VLAN IDs 1 to 1005).
Chapter 2
Status Ports
active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6
active
active
active
active
Status Ports
active Fa0/2
Parent RingNo BridgeNo Stp
- - -
: 7
: 7
Catalyst 2950 and 2955 Cisco IOS Commands
BrdgMode Trans1 Trans2
- - 0 0
0L-10102-01