Cisco Catalyst 2950 Command Reference Manual page 533

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
To allow unlimited access to a secure address, configure it as a secure address, and disable aging for the
statically configured secure address by using the no switchport port-security aging static interface
configuration command.
Examples
This example sets the aging time as 2 hours for absolute aging for all the secure addresses on a port:
Switch(config)# interface fastethernet0/1
Switch(config-if)# switchport port-security aging time 120
This example sets the aging time as 2 minutes for inactivity aging type for configured secure addresses
on a port:
Switch(config)# interface fastethernet0/2
Switch(config-if)# switchport port-security aging time 2
Switch(config-if)# switchport port-security aging type inactivity
Switch(config-if)# switchport port-security aging static
This example shows how to disable aging for configured secure addresses:
Switch(config-if)# no switchport port-security aging static
Related Commands Command
show port-security
switchport port-security
0L-10102-01
Description
Displays the port security settings defined for the port.
Enables port security on a port, restricts the use of the port to a
user-defined group of stations, and configures secure MAC addresses.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
switchport port-security aging
2-505