Appendix; Catalyst 2950 And 2955 Switch Debug Commands - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:

Table of Contents

A P P E N D I X

This appendix describes the Catalyst 2950- and Catalyst 2955-specific debug privileged EXEC

commands. These commands are helpful in diagnosing and resolving internetworking problems and

should be used only with the guidance of Cisco technical support staff.

Because debugging output is assigned high priority in the CPU process, it can render the system

unusable. For this reason, use the debug commands only to troubleshoot specific problems or during

troubleshooting sessions with Cisco technical support staff. It is best to use the debug commands during

periods of lower network traffic and fewer users. Debugging during these periods decreases the

likelihood that increased debug command processing overhead will affect system use.

Catalyst 2950 and Catalyst 2955 Switch Command Reference

Show Quick Links

Table of Contents

Catalyst 2955