Cisco Catalyst 2950 Command Reference Manual page 376

show interfaces counters
Table 2-25
Field
Carri-Sen
Runts
Giants
1. FCS = frame check sequence
This is an example of output from the show interfaces counters trunk command. It displays the trunk
counters for all interfaces.
Switch# show interfaces counters trunk
Port
Gi0/1
Gi0/2
Table 2-26
Field
TrunkFrameTx
TrunkFrameRx
WrongEncap
Related Commands Command
show interfaces
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-348
show interfaces counters errors Field Descriptions (continued)
Description
Displays the number of occurrences in which the interface detects a false carrier
when frames are not sent or received.
Displays the number of frames received on an interface that are smaller than 64
bytes and have an invalid FCS value.
Displays the number of frames that are larger than the maximum allowed frame
size and have a valid FCS value.
Table 2-26 describes the fields in the output.
TrunkFramesTx TrunkFramesRx
0 0
0
show interfaces counters trunk Field Descriptions
Description
Displays the number of frames sent on a trunk interface.
Displays the number of frames received on a trunk interface.
Displays the number of frames that are received on an interface and have the
incorrect encapsulation type.
Description
Displays interface characteristics.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
WrongEncap
0
0 0
0L-10102-01