Cisco Catalyst 2950 Command Reference Manual page 463

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
port-security
rtr
snmp
stpx
syslog
tty
udp-port port-number
vlan-membership
vlancreate
vlandelete
vtp
Defaults This command is disabled. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap types to the host. No informs
are sent to this host.
If no version keyword is present, the default is version 1.
If version 3 is selected and no authentication keyword is entered, the default is the noauth
(noAuthNoPriv) security level.
In releases earlier than Cisco IOS Release 12.1(6)EA2, ifIf the community-string is not defined by using
Note
the snmp-server community global configuration command before using this command, the default
form of the snmp-server community command is automatically inserted into the configuration. The
password (community-string) used for this automatic configuration of the snmp-server community will
be the same as that specified in the snmp-server host command.
Command Modes
Global configuration
Command History Release
12.0(5.2)WC(1)
12.1(6)EA2
12.1(9)EA1
12.1(11)EA1
12.1(12c)EA1
12.1(13)EA1
12.1(14)EA1
0L-10102-01
(Optional) Send port security traps.
(Optional) Send SNMP Response Time Reporter traps.
(Optional) Send SNMP-type traps.
(Optional) Send SNMP STPX MIB traps.
(Optional) Send SNMP syslog traps.
(Optional) Send TCP connection traps.
(Optional) Send notification host's User Datagram Protocol (UDP) port
number. The range for port-number is 0 to 65535.
(Optional) Send SNMP VLAN membership traps.
(Optional) Send SNMP VLAN-created traps.
(Optional) Send SNMP VLAN-deleted traps.
(Optional) Send VLAN Trunking Protocol (VTP) traps.
Modification
This command was introduced.
The cluster, mac-notification, and rtr keywords were added.
The vlan-membership keyword was added.
The version 3 option was added, with the auth and noauth keywords.
The envmon and priv keywords were added. The alarm keyword was also
added (only for the Catalyst 2955 switch).
The port-security keyword was added.
The bridge, copy-config, flash, stpx, syslog, vlancreate, and vlandelete
keywords were added.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
snmp-server host
2-435