Cisco Catalyst 2950 Command Reference Manual page 361

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Table 2-17
Field
FD
Position
Open
PID
Path
This is an example of output from the show file information nvram:startup-config command:
Switch# show file information nvram:startup-config
nvram:startup-config:
type is ascii text
Table 2-18
Table 2-18
Field
ascii text
coff
ebcdic
image (a.out)
image (elf)
lzw compression
tar
This is an example of output from the show file systems command:
Switch# show file systems
File Systems:
*
0L-10102-01
show file descriptors Field Descriptions
Description
File descriptor. The file descriptor is a small integer used to specify the file once
it has been opened.
Byte offset from the start of the file.
Flags supplied when opening the file.
Process ID of the process that opened the file.
Location of the file.
lists the possible file types for the previous example.
Possible File Types
Size(b) Free(b)
7741440 433152
7741440 433152 unknown
32768 25316
- - network
- -
- -
- -
- -
- - network
- - network
Description
Configuration file or other text file.
Runable image in coff format.
Text generated on an IBM mainframe.
Runnable image in a.out format.
Runnable image in elf format.
Lzw compressed file.
Text archive file used by the CIP.
Type Flags Prefixes
flash rw flash:
rw zflash:
nvram rw nvram:
rw tftp:
opaque rw null:
opaque rw system:
opaque ro xmodem:
opaque ro ymodem:
rw rcp:
rw ftp:
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show file
2-333