Cisco Catalyst 2950 Command Reference Manual page 527

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Examples This example shows how to cause an interface to refrain from negotiating trunking mode and to act as a
trunk or access port (depending on the mode set):
Switch(config-if)# switchport nonegotiate
You can verify your setting by entering the show interfaces interface-id switchport privileged EXEC
command.
Related Commands Command
show interfaces
switchport mode
0L-10102-01
Description
switchport Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
Configures the VLAN membership mode of a port.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
switchport nonegotiate
2-499