Debug Ip Dhcp Snooping - Cisco Catalyst 3550 Command Reference Manual

Appendix B Debug Commands

debug ip dhcp snooping

Use the debug ip dhcp snooping privileged EXEC command to debug Dynamic Host Configuration
Protocol (DHCP) snooping events. Use the no form of this command to disable debugging output.
Syntax Description
acl
event
packet
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug ip dhcp snooping command is the same as the no ip debug dhcp snooping command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping
binding
78-11195-09
debug ip dhcp snooping {acl | event | packet}
no debug ip dhcp snooping {acl | event | packet}
Display all DHCP snooping access control list (ACL) messages.
Display all DHCP snooping event messages.
Display all DHCP snooping packet messages.
Modification
This command was first introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Catalyst 3550 Multilayer Switch Command Reference
debug ip dhcp snooping
B-15