Show System Mtu - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

show system mtu

Use the show system mtu privileged EXEC command to display the global maximum packet size or
maximum transmission unit (MTU) set for the switch.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show system mtu command:
Switch# show system mtu
System MTU size is 1500 bytes
Related Commands Command
system mtu
78-11381-05
show system mtu [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Description
Sets the MTU size for the switch.
Catalyst 2950 Desktop Switch Command Reference
show system mtu
2-215