Show Running-Config Vlan - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Cisco IOS Commands

show running-config vlan

Use the show running-config vlan privileged EXEC command to display all or a range of
VLAN-related configurations on the switch.
Syntax Description
vlan-ids
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(9)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show running-config vlan command:
Switch# show running-config vlan 900-2005
Building configuration...
Current configuration:
!
vlan 907
!
vlan 920
!
vlan 1025
!
vlan 2000
!
vlan 2001
end
78-11381-05
show running-config vlan [vlan-ids] [ | {begin | exclude | include} expression]
(Optional) Display configuration information for a single VLAN identified by
VLAN ID number or a range of VLANs separated by a hyphen. For vlan-id, the
range is 1 to 4094 when the enhanced software image (EI) is installed and 1
to 1005 when the standard software image (SI) is installed. Do not enter leading
zeros.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Catalyst 2950 Desktop Switch Command Reference
show running-config vlan
2-205