Show Mac Address-Table Notification - Cisco Catalyst 2950 Command Reference Manual

show mac address-table notification

show mac address-table notification
Use the show mac address-table notification user EXEC command to display parameters for the MAC
notification feature.
Beginning with Release 12.1(11)EA1, the show mac address-table notification command replaces the
Note
show mac-address-table notification command (with the hyphen). The show mac-address-table
notification command (with the hyphen) will become obsolete in a future release.
Syntax Description interface interface-id
| begin
| exclude
| include
expression
Defaults
This command has no default setting.
Command Modes
User EXEC
Command History Release
12.1(6)EA2
12.1(11)EA1
Usage Guidelines
Use the show mac address-table notification command without keywords to display parameters for all
interfaces.
Use this command with the interface keyword to display parameters for a specific interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table notification command:
Switch> show
MAC Notification Feature is Disabled on the switch
Catalyst 2950 Desktop Switch Command Reference
2-180
show mac address-table notification [interface interface-id] [ | {begin | exclude | include}
expression]
(Optional) Specify an interface.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
The show mac-address-table notification command was replaced by the
show mac address-table notification command.
mac address-table notification
Chapter 2 Cisco IOS Commands
78-11381-05