Show Access-Lists - Cisco 300 Series Cli Manual

ACL Commands
78-21075-01 Command Line Interface Reference Guide
--------------
absolute start 12:00 1 jan 2005
absolute end 12:00 31 dec 2005
periodic monday 8:00 to friday 20:00

48.15 show access-lists

Use the show access-lists Privileged EXEC mode command to display access
control lists (ACLs) configured on the switch.
Syntax
name
show access-lists [
time-range-active [name]
show access-lists
Parameters
•
name—Specifies the name of the ACL.
•
time-range-active—Shows only the Access Control Entries (ACEs) whose
time-range is currently active (including those that are not associated with
time-range).
Command Mode
Privileged EXEC mode
Example
switchxxxxxx#show access-lists
Standard IP access list 1
deny any any
Standard IP access list 2
deny 192.168.0.0/24
permit any any
Standard IP access list 3
deny 192.168.0.1 10.0.0.0/8
permit any any
]
48
791