Setup; Pump Mode Setting - Hitachi CHROMASTER 5160 Instruction Manual

3.5 Setup

3.5.1 Pump Mode Setting

This section shows how to set the pump in the single-liquid
delivery mode (FLOW mode).
NOTE: Once this setting is made, it is memorized and need not
be made each time.
SET UP
POWER ON +
Press the POWER and SET UP UTLTY keys simultaneously.
The Pump mode setting screen will be displayed.
Continue pressing SET UP UTLTY until the setting screen appears.
SETUP: PUMP
1
ENT
SETUP ITEMS (PUMP=1
1
Select PUMP
1 ENT
PUMP (1=1,
1
Select PUMP number
3 ENT
SETUP:
NOTE: Only FLOW (isocratic mode) is selectable for the
1 ENT
GR MODE (LOW=1,
2
Select FLOW (isocratic mode)
2 ENT
LOW :Low gradient mode
FLOW :Isocratic mode
(to be continued)
UTLTY
MODE CONTRAST
FLOW 4
CONTRAST=2
2=2, 3=3)
PUMP
3
PUMP3 setting.
FLOW=2)
3 - 61
S.NO
02AB-111
D.MIX=3)
MODE CONTRAST
FLOW 4
S.NO
02AB-111