3.2 UTLTY Setting
3.2.2 Analog Temperature Output
Set the output temperature for the analog output connector on
the rear of the instrument. Output temperature conforms to the
relational expression given below.
Temperature [°C] = (output voltage [mV]/9.6) - 10
UTILITY (LEAK SENSOR=1, ANALOG OUT=2,
2
ERROR OUT=3, CALIBRATION=4)
ANALOG OUTPUT TYPE (OVEN =1, AMBIENT=2)
1
3 - 12
SET UP
UTLTY
2 ENT
Select an output temperature.
1 ENT
Monitor screen