Hitachi CHROMASTER 5160 Instruction Manual page 361

4.4 Maintenance/Check Procedure
Inflammation or injury due to toxic, corrosive or
stimulative solvent!
When using a toxic, corrosive or stimulative solvent, be
careful not to incur inflammation or injury. For details of
the properties of each solvent and how to handle it, refer to
Material Safety Data Sheet (MSDS). Be sure to handle
each solvent properly.
(a) Wear proper protective means (e.g., safety goggles)
so that a solvent will not come into direct contact with
the skin, eye, etc.
(b) Ventilate the laboratory room adequately to prevent
accidental inhalation of harmful solvent vapor.
If contamination still remains on the flow path despite the above-
mentioned cleaning, disassemble the flow cell and then clean the
components as instructed below.
(1) Remove the fastening screws (M3) with a Phillips
screwdriver and separate the flow cell main frame.
Fig. 4-4 Flow Cell Fastening Screws (M3)
4 - 16
WARNING
Fastening screw (M3)