Hitachi CHROMASTER 5160 Instruction Manual page 358

Cable connector for
thermostatic flow cell
control (option)
Inflammation or injury due to toxic, corrosive or
stimulative solvent!
When using a toxic, corrosive or stimulative solvent, be
careful not to incur inflammation or injury. For details of
the properties of each solvent and how to handle it, refer to
Material Safety Data Sheet (MSDS). Be sure to handle
each solvent properly.
(a) Wear proper protective means (e.g., safety goggles)
so that a solvent will not come into direct contact with
the skin, eye, etc.
(b) Ventilate the laboratory room adequately to prevent
accidental inhalation of harmful solvent vapor.
If there is contamination inside the flow cell, cleaning is required.
Items to be prepared for flow cell cleaning:
• Injector (made of glass, having a capacity of about 10 mL)
• Detergent
Clamp screw
Fig. 4-3 Check of Flow Cell
4 - 13
WARNING
4.4.3