Operation Of Marker; Setting Of Time Program - Hitachi CHROMASTER 5160 Instruction Manual

3.4 Analyzing Operation

3.4.3 Operation of Marker

3.4.4 Setting of Time Program

Marker is output to the recorder terminal alone. This is usable
as a reference for measurement start or as an event marker
when the set condition is changed during measurement, for
example.
The following screen appears.
SET PROGRAM NO. (1–9)
1
Press [numerical] key (within [1] to [9]), and then the [ENT] key.
Next, input the number of the program to be created or modified.
Pressing the ESC key returns display to the monitor screen
without modifying the setting.
The mode selection screen appears.
EDIT MODE (MODIFY=0, NEW=1)
0
Input Numeral
0 MODIFY :
1 NEW
Setting of each Step
TIME WL
0.0 250
3 - 38
MARKER
(Marker)
1
INSERT
(Set program)
PROG
Function
Adds or modifies the stored time
program.
: Deletes the stored time program and
creates a new time program.
BASE (A/Z=1, HOLD=2)
1 1