Hitachi CHROMASTER 5160 Instruction Manual page 45

(2) Numerical input
(a) A cursor is indicated on the first character in the input
field. Previous setup value is indicated in the input
field.
(b) Numerical and decimal (.) input are allowed up to the
number of maximum character input.
(c) Press the ENT key to register the input value, and
move to the next item.
When the input value is error, the cursor is set up in the
first character of the input field while indicating the previous
input value, and waits for retype.
Press the ESC key to return to the initial screen (monitor
screen).
Even if the ESC key is pressed during input, the inputting
parameter won't be renewed.
NOTE: When turning on the power supply, default
numbers are indicated in the selection item.
When the CL key is pressed in the input field, indication in
the field is deleted, and the cursor returns to the first
character in the input field
When the DEL key is pressed in the input field, items are
deleted while editing the program.
When the ESC key is pressed during the plural parameter
setup operation, it is reflected to the items that the ESC
key has pressed.
(3) Cancellation of input
When the ENT key is not pressed yet: press the CL key,
and re-enter.
When the ENT key was already pressed: press the ESC
key to return to the 1
When the DEL key is pressed in the input part during
editing a program, the item will be deleted.
When the ESC key is pressed during the plural parameter
setup operation, it is reflected to the items that the ESC
key has pressed.
3 - 8
st
monitor screen. And re-enter.