Hitachi CHROMASTER 5160 Instruction Manual page 189

APPENDIX 3. TERMINOLOGIES
e-line
Used for an analysis-specific digital network.
UI pad
A keypad with LCD to operate an instrument.
IFC
Interface control board to control the Chromaster series
instrument by PC. One IFC for every one system is required.
Isocratic system
A single liquid is fed using one pump.
Low-pressure gradient system
Using one pump, a mixing ratio of two to four mobile phases is
varied with time for analytical operation.
Liquid leak sensor
A sensor to detect liquid leakage in a column oven. It detects
fluid in a drain tray.
Initialize
To reset the instrument in the initial status
Initial screen
After power on, the initial screen appears upon completion of
initialization.
Warming-up
To warm the instrument for stable analysis.
Error message
A message displayed when an anomaly occurs in the instrument.
Degassing
Eliminates the air in a mobile phase and wash fluid.
Utility
Used to set up operating conditions of the instrument.
APPENDIX 3 - 1