Hitachi CHROMASTER 5160 Instruction Manual page 41

Table 3-3 2
Indication
P-UNIT
P.MAX
P.MIN
D.MIX
P.WASH
NOTE: For Chromaster 5160 Pump, an internal maximum
operating pressure will be set up according to the flow
rate setting.
Pressure limit range:
0 to 2.500 mL/min ............ 60.0 MPa,
2.501 to 5.000 mL/min ..... 30.0 MPa.
rd
(d) 3 Monitor Screen
OPTION
Table 3-4 3
Indication
LOW GR.
P.WASH
A.VALVE
D.MIX
3 - 4
nd
Monitor Screen
Description
Pressure unit (bar, psi, kgf/cm2, MPa can be
selected). Use UTLTY to select a pressure
unit.
Maximum operating pressure.
When the pressure becomes higher than the
setup value, a pump is stopped
automatically.
Minimum operating pressure
When the pressure becomes lower than the
setup value, a pump is stopped
automatically.
Dynamic mixer
USE/No USE
Wash pump
ON: Running, OFF: Suspended
LOW GR. P.WASH
YES YES
rd
Monitor Screen
Description
Low pressure gradient unit connection
state
Plunger wash pump connection state
Auto purge valve connection state
Dynamic mixer connection state
A.VALVE D.MIX [ -- ]
YES YES 1