Hitachi CHROMASTER 5160 Instruction Manual page 921

resulting in an adverse effect on operation.
When securing the Teflon tube and SUS pipe, observe the
following instructions.
(a) Finger-tighten the setscrew (made of resin).
(b) Referring to 6.2, fasten the setscrew (made of SUS) so
that liquid leakage will not occur.
Setscrew
(made of resin)
Column
Setscrew
(made of SUS)
(6) Handling of Detector
When the autosampler is to be left unused for a long time,
wash the inside of the detector, short-circuit the outlet and
inlet, and seal the detector with proper liquid filled in it.
(7) Replacement of Consumable
The replacement time of each consumable differs
depending on the condition of use. Be sure to replace
each consumable with a new before it becomes completely
unusable.
3 - 77
Finger-tighten the
Teflon tube.
Fasten the SUS pipe.