Hitachi CHROMASTER 5160 Instruction Manual page 288

3.1 Turning on Power Supply
(d) Program setup screen
TIME WL
0.0 250
Input part
(2) Numerical Input Procedure
(a) A cursor appears at the head of input part. In this part,
the previously set numeral is indicated.
(b) Within the acceptable number of characters, input by
numerical keys and decimal point key will be accepted.
(c) A numerical input is accepted by the ENT key and
transition will be made to the next item.
If an input numeral causes an error, the cursor is
returned to the head of character input part with the
input numeral indicated, thus awaiting reentry.
Pressing the ESC key calls back the initial screen
(monitor screen).
If the ESC key is pressed during the course of
numerical input, the parameter whose input is yet to be
completed will not be updated (previously set value
remains set).
NOTE: In item selection processing, the default item
selection No. is indicated upon turning on power
supply.
When the DEL key is pressed in an input part during program
editing, the relevant item will be deleted. If the ESC key is
pressed at the mid-point of plural parameter setting, items before
pressing the ESC key will be accepted.
3 - 6
Input item
BASE (A/Z=1, HOLD=2)
1 1