Hitachi CHROMASTER 5160 Instruction Manual page 371

5.2 Lamp Replacement
5.2.1 Replacement of D Lamp
2
(1) Part and Tools to be Prepared
• New D
lamp
2
• Phillips screwdriver
• Blade-edged screwdriver
(2) Check the following.
• The power switch of this instrument is turned off.
• The power cord is unplugged from the instrument.
(3) How to Replace D
(a) Detach the lamp cover (by removing 2 fastening
screws).
ｃ
(b) Loosen three screws of D
on the terminal block and pull out the wires.
5 - 4
Lamp
2
Fastening screw
Lamp cover
lamp lead wires connected
2
Fastening screw
Terminal block
Lead wire