Samsung iDCS 500 Programming Manual page 99

iDCS 500
TECHNICAL MANUAL
MMC: 305
DESCRIPTION:
This MMC allows only one of the four options to be selected; the assignment of
account code with verification, account code without verification, authorization
codes, or none on a per-station basis or on an all-station basis. The system
supports 250 authorization codes for a iDCS 500-M system and 500 for a iDCS
500-L system. It has 500 account codes for a iDCS 500-M system and 999 for a
iDCS 500-L system that are verified when account codes verified is selected. If
account codes without verification is selected, then there will be no table used.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
FEATURE KEYS
0 NONE
1 AUTHORIZE
2 ACCT VERIFIED
3 ACCT NO VERIFIED
ACTION
1. Press TRSF 305
Display shows
2. Dial station number ( e.g., 205)
OR
Press UP or DOWN key to select station and
press RIGHT soft key to move cursor
ASSIGN FORCED CODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
No Account or Authorization code required (NOT forced
strictly voluntary).
Forces user to enter a valid four digit Authorization code
listed in AUTHORIZATION CODE. Table (MMC 707).
Forces user to enter a valid account code listed in
ACCOUNT CODE Table (MMC 708).
Forces user to enter an account code but this code is
NOT verified. User can make up any code (any account
code up to 12 digits including ∗ and #).
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
[201] FORCD CODE
NONE
[205] FORCD CODE
NONE
HOME
PAGE
Table of
Contents
HELP