Samsung iDCS 500 Programming Manual page 264

iDCS 500
TECHNICAL MANUAL
MMC: 712
DESCRIPTION:
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the
completion of an outward bound call. This table works in conjunction with LCR
DIGIT TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS
TABLE. After the user dials a valid digit string, the system uses the LCR ROUTE
TABLE to select a specific predetermined trunk group. There is a maximum number
of 16 routes available on a iDCS 500-M system and 32 routes available on a
iDCS 500-L system. If more than one trunk group is available for call completion,
the system uses the first designated trunk group and then starts to utilise
succeeding trunk groups. If all trunk groups are busy in a selected route, call queue
becomes active and allocates trunks as they become available.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRSF 712
Display shows
2. Dial LCR ROUTE index number 1-32 (e.g., 05)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
3. Dial TIME BAND index number 1-4 (e.g., 2)
OR
Press UP or DOWN to selected index and press
RIGHT soft key to move cursor
4. Dial LCR COS number 1-8 (e.g., 4)
OR
Press UP or DOWN to selected COS and press
RIGHT soft key to move cursor
PART 2 NOVEMBER 2001
LCR ROUTE TABLE
DISPLAY
LCR ROUTE (01:1)
C:1 G:NONE M:---
LCR ROUTE (05:1)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:1 G:NONE M:---
LCR ROUTE (05:2)
C:4 G:NONE M:---
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP