Samsung iDCS 500 Programming Manual page 205

iDCS 500
TECHNICAL MANUAL
MMC: 511
DESCRIPTION:
This MMC defines the cadence (flash rate) of single line telephone message waiting
lamps on phones connected to an 8MWSLI or a 16MWSLI card. There are two main
choices for the MW lamp cadence available, these being continuous and
interrupted as described below.
OPTION KEYS
0 INTERRUPTED
1 CONTINUOUS
PROGRAM KEYS
UP & DOWN
KEYPAD
SPEAKER
ANS/RLS
ACTION
1. Press TRSF 511
Display shows
2. Press 0 or 1 to select CADENCE
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to advance to step 3
3. Dial new values for interrupt times
(four digits)
Press RIGHT soft key to move cursor back
If valid entry, system returns to step 2
MSG WAITING LAMP CADENCE
The MW lamp will flash at a rate determined by the timer
settings. The shortest on time is 100ms and the longest on
time is 3000ms. The shortest off time is 100ms and the
longest off time is 3000ms. The timer is adjusted in 100ms
increments.
When an 8MWSLI or a 16MWSLI port has a message, the
lamp will be lit steady.
Used to scroll through options
Used to enter selections
Used to store data and advance to next MMC
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
MW LAMP CADENCE
CONTINUOUS LED
MW LAMP CADENCE
INTERRUPT LED
MW LAMP CADENCE
2000 2000
HOME
PAGE
Table of
Contents
HELP