Samsung iDCS 500 Programming Manual page 78

iDCS 500
TECHNICAL MANUAL
MMC: 217
DESCRIPTION:
Assigns a secondary station to a keyset. This secondary station can be a keyset. a
single line port or an AOM. It is recommended that the extension number for the
secondary station should be blocked from receiving direct intercom calls in MMC 314 to
prevent the secondary station being accidentally called. The secondary station assumes
the COS (Class of Service), LCR COS, and DND attributes of the primary station.
Note:
1. If the COS is changed for either station in MMC 301 the change affects both stations.
2. Secondary stations when dialed will also ring the primary extension.
3. Message from secondary extension will display that (secondary) extension numbers.
Callback to extension (secondary) as well.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRSF 217
Display shows
2. Enter the primary station number via dial
keypad (e.g. 201)
OR
Press UP or DOWN to select and press
RIGHT soft key
3. Enter the secondary station number via dial
keypad (e.g. 205)
OR
Press UP or DOWN to select and press
RGHT soft key
PROGRAMMING
PART 2 NOVEMBER 2001
STATION PAIR
DISPLAY
[201] PRIMARY
SECONDARY:NONE
[201] PRIMARY
SECONDARY:NONE
[201] PRIMARY
SECONDARY:205
HOME
PAGE
Table of
Contents
HELP