Samsung iDCS 500 Programming Manual page 297

iDCS 500
TECHNICAL MANUAL
MMC: 724
DESCRIPTION:
This MMC allows the technician to change directory numbers for stations, trunks,
station groups, trunk groups and feature access codes. The system can be
preprogrammed with a default three or four digit numbering for station, station
groups and trunk numbers depending on the position of the DIP switches on the
PMCP card. There is an error message provided to prevent the accidental
duplication of a directory number or feature access code.
DIAL OPTION
0 STN NUM PLAN
1 TRK NUM PLAN
2 AA NUMPLAN
3 MISC NUM PLAN
4 STNG NUM PLAN
5 TRKG NUM PLAN
6 FEAT NUM PLAN
DIAL NUMBERING PLAN
DESCRIPTION
This is where station directory numbers are
changed or assigned.
This is where trunk directory numbers are
changed or assigned.
This is where AA port directory numbers are
changed or assigned.
This is where directory numbers for relays,
MOH ports and the alarm sensor are changed
or assigned.
This is where station group numbers are
changed or assigned.
This is where trunk group numbers are
changed or assigned.
This is where feature access codes are
changed or assigned. Dialing codes are
entered via the dial pad key by pressing the
dial pad number the required steps to select
the feature. For example, for OHVA, the
number 6 would be pressed three times.
NOTE: Please remember that this program is
system-wide.
PROGRAMMING
PART 2 SEPTEMBER 2003
HOME
PAGE
Table of
Contents
HELP