Samsung iDCS 500 Programming Manual page 276

iDCS 500
TECHNICAL MANUAL
MMC: 717
DESCRIPTION:
This MMC defines the home area code and country code for the iDCS 500 system.
This information is used for caller ID, ANI and ISDN calls in defining the area code
on incoming calls. This MMC removes the local area code to allow callback without
digit modifications in LCR.
NOTE: If 10 digit local dialing is used My Area Code is not used. If 7 digit local
dialing is used, then My Area Code is used and removes the area code.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Moves cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 717
Display shows
2. Enter 0 for COUNTRY or 1 for AREA.
OR
Press UP or DOWN keys to make selection
and press RIGHT soft key to move cursor
3. Enter area code (maximum 4 digits) via dial
keypad (e.g., 2) and press RIGHT soft key to
move cursor back to step 2.
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: NONE
RELATED ITEMS: TRUNK PROGRAMMING
PROGRAMMING
PART 2 NOVEMBER 2001
MY AREA CODE
DISPLAY
MY AREA CODE
AREA :
MY AREA CODE
COUNTRY: 1
MY AREA CODE
AREA :2
HOME
PAGE
Table of
Contents
HELP