Samsung iDCS 500 Programming Manual page 342

iDCS 500
TECHNICAL MANUAL
MMC: 743
DESCRIPTION:
This MMC is only used for the Samsung Plug in Voice Mail Card.
Some specific station in the phone system can be assigned to automatically record
conversations. When this option is set, all incoming, all outgoing, or all calls
(incoming or outgoing) can be recorded.
When this option is selected a specific port can be assigned for each station set to
automatic conversation recording or the effectiveness of this feature cannot be
guaranteed.
In this MMC you can assign:
1. Which station use this feature. – Station number
2. What mailbox the conversation are recorded in. – Mailbox number
3. What type of conversations are recorded, in, out or both. – I, O or B
4. What port is dedicated to the station. – Voice mail port number
A maximum of 8 stations can this feature in the iDCS 500 system.
The same port cannot be assigned to more than one station. Attempts to do this will
result in an error message.
When a Voice Mail port is assigned here, it is automatically removed from the Voice
Mail group (529 or 549) defined in MMC 601.
WARNING: Before using this feature make sure that you are not violating any state
or federal laws. Some states require that the recorded party be notified. SAMSUNG
is not responsible for any illegal use of this feature.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to delete an entry
PROGRAMMING
PART 2 NOVEMBER 2001
AUTO RECORD
HOME
PAGE
Table of
Contents
HELP