Samsung iDCS 500 Programming Manual page 361

iDCS 500
TECHNICAL MANUAL
MMC: 800
DESCRIPTION:
Used to open and close technician-level programming. If programming is not
opened and an attempt is made to access a system MMC, the error message
ACCESS DENIED will be displayed.
A four digit passcode is required to access this MMC. Each character can be digits
0-9. When opened, this MMC enables access to all MMCs.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION
1. Press TRSF 800
Display shows
2. Enter passcode
Correct code shows
Incorrect code shows
3. Enter 1 to enable or 0 to disable
OR
Press UP or DOWN to select
Press RIGHT soft key to move to tenant
number and enter tenant number (1-2)
4. Press SPK to advance to MMC entry level
ENABLE TECHNICIAN PROGRAM
ENABLE TECH.PROG
PASSCODE:
ENABLE TECH.PROG
PASSCODE: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
ENABLE TECH.PROG
DISABLE TENANT : 1
ENABLE TECH. PROG
PASSCODE ERROR
ENABLE TECH.PROG
ENABLE TENANT : 1
801:TEC.PASSCODE
SELECT PROG.ID
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
HOME
PAGE
Table of
Contents
HELP