Samsung iDCS 500 Programming Manual page 257

iDCS 500
TECHNICAL MANUAL
MMC: 709
DESCRIPTION:
This MMC provides a means to program three trunk code tables as described
below.
PBX CODE: This table contains up to five entries and is used to identify the trunk
access codes needed for toll restriction to be properly applied when the system is
used either behind a PBX or with CENTREX-supplied dial tone. Toll restriction will
only be applied on trunks flagged as PBX in MMC 401 if a trunk access code
entered in this table is dialed. Toll restriction will be applied to the digits following
the trunk access code.
SPECIAL CODE: This table identifies to the system dialling rules the special feature
codes used to activate central office custom calling features such as CID Block and
call waiting disable. The special feature codes can be used on a per call basis
without affecting LCR or toll restriction programming. There is a maximum of ten
(10) entries available each of which may be up to four digits long. The four dialing
rules that apply to the Special Code Table are as follows:
Rule 1. Toll restriction is only applied to digits following the entries in the Special
Code Table. This eliminates toll restriction bypass with second dial tone
central office features such as CID block (✱67).
Rule 2. LCR will only route calls based on the digits following the entries in the
Special Code Table. This rule allows end user per call special code
activation.
Rule 3. LCR modify digits tables will only delete digits that are follow in the
Special Code Table entries. This allows central office features such as
CID block to be used when LCR deletes digits. Can be used in Foreign
Exchange (FX) routing by removing the 1+ area code..
Rule 4. LCR modify digits tables will only insert digits after the Special Code
Table entries (MMC 718). This allows for central office features such as
call waiting block to be activated but route the call with a specific PIC
code such as 10288 (AT&T).
Example of Rule 4: User dials ✱67 1 305 529 2900, the 400si will seize a
C.O. line and dial ✱67 10288 1 305 529 2900.
TOLL PASS CODE / SPECIAL CODE TABLE
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP