Samsung iDCS 500 Programming Manual page 156

iDCS 500
TECHNICAL MANUAL
MMC: 419
DESCRIPTION:
Allows the technician to select the ring tone heard at a keyset when called by a
specific station or when a specific trunk rings that keyset. There is also a cadence
control option to perform a similar function for single line sets. There are eight ring
tones available along with a Follow Station (F-STN) option for the keysets. There are
5 cadences and a follow station option for SLT's.
TONE OPTION
F-STN
1 ~ 8
CADENCE OPTION
F-STN
1
2
3
4
5
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
DISTINCTIVE RINGING
DESCRIPTION
Calls will ring with the keyset users choice of ring frequency.
Calls from the programmed station or trunk will ring keysets
with this ring frequency.
DESCRIPTION
Calls will ring with the normal SLT ring cadences.
Calls from the programmed station or trunk will ring SLT's
with the intercom ring cadence.
Calls from the programmed station or trunk will ring SLT's
with the CO ring cadence.
Calls from the programmed station or trunk will ring SLT's
with the DOOR ring cadence.
Calls from the programmed station or trunk will ring SLT's
with the ALARM ring cadence.
Calls from the programmed station or trunk will ring SLT's
with the CALLBACK ring cadence.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP