Samsung iDCS 500 Programming Manual page 153

iDCS 500
TECHNICAL MANUAL
2. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
3. Press the right softkey and enter the number
of incoming digits.
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: FOLLOW INCOMING
RELATED ITEMS: MMC 714 DID NUMBER AND NAME TRANSLATION
MMC: 416
[705] E&M TRANS
FOLLOW DID TRANS
[ALL] E&M TRANS
FOLLOW INCOM DGT
[ALL] E&M TRANS
NUM OF REC DGT: 4
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP