Samsung iDCS 500 Programming Manual page 16

iDCS 500
TECHNICAL MANUAL
MMC: 100
DESCRIPTION:
Allows the system administrator or technician to lock or unlock an individual station
or all stations simultaneously. The three options are as follows:
0 UNLOCKED
1 LOCKED OUTGOING
2 LOCKED ALL CALLS
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 100
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and use
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations
3. Enter 0 to unlock or 1 to lock (e.g. 1)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2
PART 2 NOVEMBER 2001
STATION LOCK
Unlocks a locked station.
The keyset cannot make calls outside the
system. It can however make and receive
intercom calls and receive incoming C.O.
calls. When in this mode the HOLD key of
a DCS keyset will flash slow RED.
The keyset cannot make or receive any
calls. When in this mode the HOLD key of
a DCS keyset will light steady RED.
DISPLAY
[201] STN LOCK
UNLOCKED
[205] STN LOCK
UNLOCKED
[ALL] STN LOCK
??
[205] STN LOCK
LOCKED OUT
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP