Samsung iDCS 500 Programming Manual page 91

iDCS 500
TECHNICAL MANUAL
MMC: 301
DESCRIPTION:
Used to assign class of service to each keyset. There are 30 different classes of
service that are defined in MMC 701, Assign COS Contents. There are 6 ring plans
based on the Ring Plan Time in MMC 507 that can apply to the COS. Classes of
service are numbered 01–30. Default COS is COS 01.
Note: Check if Secondary Stations are in use MMC 217. Caution should be taken
when changing COS for these stations. If either Primary station or Secondary station
COS is changed then the "mated" station is also changed.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 301
Display shows first station
2. Dial station number (e.g., 205)
OR
Use UP and DOWN to scroll through stations
Press RIGHT soft key to advance to step 3
OR
Use UP and DOWN to scroll through stations
and press LEFT soft key to advance
to Step 4
OR
Press ANS/RLS to select all stations
3. Enter new ring plan selection via
dial keypad
OR
Press UP or DOWN key to make selection
OR press RIGHT soft key to move cursor
ASSIGN STATION COS
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
[201] STN COS
1:01 2:01 3:01
[205] STN COS
1:01 2:01 3:01
[ALL] STN COS
1:01 2:01 3:01
[205] STN COS
1:01 2:01 3:01
[205] STN COS
1:01 2:01 3:01
HOME
PAGE
Table of
Contents
HELP