Samsung iDCS 500 Programming Manual page 249

iDCS 500
TECHNICAL MANUAL
MMC: 705
DESCRIPTION:
Enables the assignment of system speed dialling numbers. There are up to 950
entries available for programming (see MMC 606). Each speed dial number
consists of a trunk or trunk group access code followed by a separator and up to 24
digits to be dialled. These dialled digits may consist of 0-9, ✱ and #. If the system
recognises a valid trunk or trunk group access number, it will automatically insert
the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
B Used to insert a flash code "F"
C Used to insert a pause code "P"
D Used to insert a pulse/tone conversion code "C"
E Used to mask/unmask following digits - shows as "[" or "]"
F Used to enter name for speed dial bin (see MMC 706)
ACTION
1. Press TRSF 705
Display shows
2. Dial speed index desired (e.g., 505)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter access code (e.g., 9/701) plus the
phone number up to 24 digits (digits will
scroll under) and press RIGHT soft key to
return to step 2
4. Press F key to toggle to MMC 706 step 3 to
enter name
ASSIGN SYSTEM SPEED DIAL
PROGRAMMING
PART 2 SEPTEMBER 2003
DISPLAY
SYS SPEED DIAL
050:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
SYS SPEED NAME
505:
HOME
PAGE
Table of
Contents
HELP