Samsung iDCS 500 Programming Manual page 47

iDCS 500
TECHNICAL MANUAL
MMC: 115
DESCRIPTION:
Allows the system administrator to set a programmed message at any or all
keysets. There are 20 messages available on a iDCS 500-M system and 30 on a
iDCS 500-L system. The first ten are pre-programmed and the remaining entries can
be customized in MMC 715, Programmed Station Message. On a iDCS 500-L
system messages 26-30 are special in that a five digit extender can be added for a
date and time.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 115
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
3. Dial an entry number to select message
number, e.g., 05
OR
Press UP or DOWN to select message
Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
SET PROGRAMMED MESSAGE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
[201] PGMMSG(00)
CANCEL PGM MSG
[205] PGMMSG(00)
CANCEL PGM MSG
[ALL] PGMMSG(??)
[205] PGMMSG(05)
PAGE ME
HOME
PAGE
Table of
Contents
HELP