Samsung iDCS 500 Programming Manual page 423

iDCS 500
TECHNICAL MANUAL
MMC: 853
DESCRIPTION:
This MMC is used to place stations, trunks, and common resources equipment in a
maintenance busy condition. This can be used to isolate suspected intermittent
problem equipment. Stations placed in maintenance busy will behave like a station
in DND when called. The calling stations display (if equipped) will show "MADE
BUSY" when called. Stations receiving DID or E&M type calls will receive a DND/ No
more calls tone. The station display will still function with station and date. When the
busy station is accessed, it will function like a locked out station. Trunks made busy
can not originate calls. Ring down type trunks will still ring the programmed
destination. Common resource equipment such as DSP's, CID DSP's and
miscellaneous equipment such as page ports, AA ports or voice mail card ports can
also be placed in a maintenance busy state.
MAINTENANCE BUSY OPTIONS
0. TRK = Trunks
1. STN = Stations
2. PAGE = Page Ports
3 AA = Auto Attendant card ports
4. DTMFR:DSP =
5. CID:DSP = CID DSP # 01-42
6. R2MFC:DSP = R2MFC:DSP # 01-08
7. CONF:GRP = CONF:GRP #01-24
NOTE: Selectable conditions 0 = idle state
NOTE: In cases of DSP/ CID DSP selection when DSP is not mounted display will
show NONE. If mounted display will show IDLE by default.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
TRSF
MAINTENANCE BUSY
DSP # 01-48
1 = busy state
Scroll through options
Used to enter selections
Move cursor or select option
Used to advance to next MMC
Exit
PROGRAMMING
PART 2 NOVEMBER 2001
HOME HOME
PAGE PAGE
Table of Table of
Contents Contents
HELP HELP