Samsung iDCS 500 Programming Manual page 355

iDCS 500
TECHNICAL MANUAL
MMC: 761
DESCRIPTION:
This is a Hotel / Motel software specific MMC.
This MMC allows the technician to set up the 8 tax rates used in MMC 760. Each tax
rate may be defined as a fixed dollar value or as a percentage of the item cost. In
addition a 10 character name may be used to define the reason for the tax. The
various options are further detailed below.
TAX RATE This is the number assigned to this tax rate. The tax rates are
numbered 1 to 8 to match the rate field in MMC 760 counting from
left to right.
TYPE This is the type of tax and defines if the VALUE is applied as a
percentage (%) of the cost of an item or is added as a fixed dollar
value (C) to an item, or included (I) in the room charge.
VALUE This is the actual tax rate that will be applied to the item cost.
NAME This is a 10 character name that will be displayed on the room bill
alongside the tax.
Names are written using the keypad. Each press of a key will select a character.
Pressing the dial pad key will move the cursor to the next position. For example, if
the directory name is "SAM SMITH," press the number "7" three times to get the
letter "S." Now press the number "2" once to get the letter "A." Continue selecting
characters from the table below to complete your message. Pressing the bottom left
programmable key will change the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right.
PROGRAMMING
PART 2 SEPTEMBER 2003
TAX RATE SETUP
HOME
PAGE
Table of
Contents
HELP