iDCS 500
TECHNICAL MANUAL
ALM
ALARM
CODE
MJB06
IPC MSGQ Under
MJB07
Task MSGQ Over
MJB07
Task MSGQ Under
MJC01
DTMF Fault
MJC02
Tone Fault
MJC10
AA-DTMF Fault
MJC11
AA-MFR Rec
MJC12
E911 Restart
MJC13
E911 Block
MJC14
VoIP Restart
MJC15
VoIP Block
MJD01
Sync Failure
MMC: 851
DEFINITION
IPC TX queue full error has occurred in the MCP.
Alarm data = IPC Queue type
(MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2)
Task MSG queue full error has occurred in the MCP.
Alarm data = Error Task Kind
(CNFG, ERRH, NPER, MSGH, DIGH, SMART, CALL, PPER,
SMDR, TMMC, IDLE)
Task MSG queue full error has occurred in the MCP.
Alarm data = Error Task Kind
(CNFG, ERRH, NPER, MSGH, DIGH, SMART, CALL, PPER,
SMDR, TMMC, IDLE)
An abnormal interrupt has occurred in the system DTMF
resources.
Alarm data = DTMF Receiver number
(MCP BASE, MCP OPT:1, MCP OPT:2, MCP OPT:3, C#2 BASE,
C#2 OPT:1, C#2 OPT:2, C#2 OPT:3, C#3 BASE, C#3 OPT:1,
C#3 OPT:2, C#3 OPT:3)
An abnormal interrupt has occurred in the system tone
resources. IE busy, ringback, error, no more calls, etc.
Alarm data = TONE Receiver number
(MCP BASE, MCP OPT:1, MCP OPT:2, MCP OPT:3, C#2 BASE,
C#2 OPT:1, C#2 OPT:2, C#2 OPT:3, C#3 BASE, C#3 OPT:1,
C#3 OPT:2, C#3 OPT:3)
An abnormal fault reported in one of the systems AA card DTMF
resources.
An abnormal fault reported in one of the systems AA card DTMF
resources has recovered.
Alarm data = Cabinet, Slot, Port (Cx-Syy-Pzz)
The E911 card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
The E911 card has restarted because the system detect the card
does not work correctly.
Alarm data = Cabinet, Slot (Cx-Syy)
The ITM3 card has restarted.
Alarm data = Cabinet, Slot (Cx-Syy)
The ITM3 card has restarted because the system detect the card
does not work correctly.
Alarm data = Cabinet, Slot (Cx, Syy)
Clocking on TEPRI cards has become asynchronous.
PROGRAMMING
PART 2 AUGUST 2003
HOME
PAGE
Table of
Contents
HELP