Samsung iDCS 500 Programming Manual page 159

iDCS 500
TECHNICAL MANUAL
7. Separator 3
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
A
B
C
ACTION
1. Press TRSF 420
Display shows
2. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor
3. Enter trunk group number via dial keypad
Press RIGHT soft key to ENTER and proceed
to the next step.
4. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor
5. Enter data via dial keypad or press HOLD for
NONE
Press RIGHT soft key to ENTER and proceed
to next step.
6. Press UP or DOWN key to make selection
7. Press RIGHT soft key to move cursor
8. Press UP or DOWN key for selection
Press RIGHT soft key to enter and
move cursor
MMC: 420
This separator indicates the close of digits being sent
on an ANI / DNIS call. Valid inputs include 0 to 9, *,
#, CC or NONE.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used in some fields where a value is entered or deleted
Used to input alpha character "A"
Used to insert alpha character "B"
Used to insert alpha character "C"
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
ANI DNIS SET UP
TRK GROUP:
ANI DNIS SET UP
TRK GROUP:_
ANI DNIS SET UP
TRK GROUP:80
ANI DNIS SET UP
SEPARATOR 1:NONE
ANI DNIS SET UP
SEPARATOR 1:NONE
ANI DNIS SET UP
DN 1: ANI NND:
ANI DNIS SET UP
DN 1: ANI NND:
ANI DNIS SET UP
DN 1: ANI NND:
HOME
PAGE
Table of
Contents
HELP