Samsung iDCS 500 Programming Manual page 63

iDCS 500
TECHNICAL MANUAL
MMC: 205
DESCRIPTION:
Designates the station that controls the loud bell ring output of a MISC
daughter-board. Each MISC daughter-board has a single loud bell audio output.
These outputs are given a DN of 3901-3903 as a default value to enable them to be
assigned.
The loud bell will follow the ring cadence of the designated station. Only a station
can be assigned to control the loud bell; a station group cannot be assigned.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Clears previous entry
ACTION
1. Press TRSF 205
Display shows current setting
2. Dial loud bell number (e.g., 3902)
OR
Use UP or DOWN to scroll through loud bell
numbers and press RIGHT soft key to move
the cursor
3. Enter station number (e.g., 201)
OR
Press UP or DOWN key to make selection
and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: UNASSIGNED
RELATED ITEMS: NONE
PART 2 NOVEMBER 2001
ASSIGN LOUD BELL
DISPLAY
[3901] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR :201
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP