Samsung iDCS 500 Programming Manual page 363

iDCS 500
TECHNICAL MANUAL
MMC: 801
DESCRIPTION:
Used to change the passcode which allows access to MMC 800 Enable Technician
Program from its current value.
NOTE: The passcode is four characters long. Each character can be digits 0-9. The
current or old passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 801
2. Enter new passcode
3. Enter new passcode again
4. If passcode is correct, press RIGHT soft key
to continue and enter desired MMC
If passcode is incorrect
System returns to step 2
5. Press TRSF to store and exit
OR
Press SPK to advance to MMC
DEFAULT DATA: DEFAULT PASSCODE = 4321
RELATED ITEMS: MMC 800 ENABLE TECHNICIAN PROGRAM
CHANGE TECHNICIAN PASSCODE
Used to enter passcodes
Save data and advance to next MMC
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
TECH. PASSCODE
: : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
VERIFY
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
PASSCODE :FAILURE
TECH. PASSCODE
NEW CODE: : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
HOME
PAGE
Table of
Contents
HELP