Samsung iDCS 500 Programming Manual page 62

iDCS 500
TECHNICAL MANUAL
MMC: 204
DESCRIPTION:
Determines whether the common bell relay contacts have an interrupted or
continuous closure when activated. If interrupted is chosen, the relay follows an
internal C.O. ring pattern of one second closed followed by three seconds open. By
default, all common bell relay pairs are assigned as 380X.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor
SPK Used to store data and advance to next MMC
ACTION
1. Press TRSF 204
Display shows current setting
2. Dial common bell number
OR
Press UP or DOWN key to make selection of
common bell numbers and press RIGHT soft
key to advance cursor
3. Dial 0 for continuous or 1 for interrupted
operation
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: CONTINUOUS
RELATED ITEMS: MMC 203 ASSIGN UA DEVICE
MMC 601 ASSIGN STATION GROUP
COMMON BELL CONTROL
DISPLAY
[3801] COM/LD BELL
CONTINUOUS
[3801] COM/LD BELL
CONTINUOUS
[3802] COM/LD BELL
INTERRUPTED
PROGRAMMING
PART 2 NOVEMBER 2001
HOME
PAGE
Table of
Contents
HELP