Samsung iDCS 500 Programming Manual page 20

iDCS 500
TECHNICAL MANUAL
4 = BUSY/NO ANSWER
5 = Not Available
6 = EXT
7 = FWD DND
8 = CFU
9 = CFB
✱= CFNR
# = CFNR/CFB
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
MMC: 102
in MMC 502 expires.
This option will activate both the BUSY option and the
NO ANSWER option at the same time.
This option, when set, will forward calls to the
external location programmed
destination after the External Forward timer in MMC
502 expires. In the M version of software only CO
calls can externally forward. In the L version there is
an option in MMC 210 to allow intercom calls to
forward as well.
This option will forward all calls to the programmed
destination whenever the forwarded station goes into
DND.
This option, when set, will forward all calls to the
programmed destination when the programmed
destination is in another network node. Available in
LE version software only.
This option, when set, will forward calls to the
programmed destination when the forwarded keyset
is busy, when the programmed destination is in
another network node. Available in LE version
software only.
This option, when set, will forward calls to the
programmed destination, when the programmed
destination is in another network node, if the
forwarded station does not answer a call before the
forward no answer timer in MMC 502 expires
Available in LE version software only.
This option is used to activate CFNR and CFB at the
same time.
PROGRAMMING
PART 2 MARCH 2003
as the forward
HOME
PAGE
Table of
Contents
HELP