Samsung iDCS 500 Programming Manual page 101

iDCS 500
TECHNICAL MANUAL
MMC: 306
DESCRIPTION:
Allows a station the ability to make a predetermined call similar to a ringdown
circuit, upon the expiration of a timer (see MMC 502 STN TIMERS, Off-Hook
Selection Timer). The hotline destination can be a station, a station group, a trunk, a
trunk group or an external number. There can be a maximum of 18 digits in the dial
string for the external number. The access code for the trunk or trunk group access
code is not counted as part of the 18.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
B
C
D
E
F
ACTION
1. Press TRSF 306
Display shows
2. Dial station number
OR
Use UP or DOWN to scroll through stations
Press RIGHT soft key to move the cursor
3. Enter the hot line destination ie a station
or trunk ID (e.g., 9 or 701) with a maximum
of 24 outgoing digits after the access code
for the CO call (see above list of options if
needed)
Bottom row of program keys are options B–E
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits—shows as "[" or "]"
Used to enter name for speed dial bin (see MMC 106)
PROGRAMMING
PART 2 NOVEMBER 2001
HOT LINE
DISPLAY
[201] HOT LINE
[205] HOT LINE
_
[205] HOT LINE
9-1305P4264100_
HOME
PAGE
Table of
Contents
HELP